How To Get The Best Furnace Repair In Thornton Colorado

Let’s begin this article by learning the history of our modern heating system. Don’t worry this will be brief.

If you are living in countries that have freezing temperatures during the deep winter season, you know the importance of a very good heating system. Even during the early stage of the evolution of society, primitive man responded to the need for a heating system of which the earliest were campfires and bonfire. However, when society evolved to a more permanent and modern structure the campfires and bonfires were replaced by the fireplace. A fireplace is made of bricks, stone or metal designed to contain a fire.

Evolution Of The Heating System

In its earliest form, it was the crude bonfire that evolved into the modern heating system. During the early stage of society in the absence of covered settlements, the primitive people in a slept open area with a bonfire in the middle. The purpose is to make them warm during cold winter nights and ward off roaming wild animals.  At present we have a heating system that can now be electronically controlled. From wood, it evolved to use to charcoals, coals, electricity, to gas, and now to solar power. You can also check out the undigested version here: https://www.master.ca/en/articles/a-brief-history-of-heating-systems.

Here’s an informative timeline of how our modern heating system came to be:  

• In 1919 Alice Parker patented the first central heating system.
• In 1935 scientists invented forced convection wall heaters that use coal furnace, electric fan, and ductwork throughout the house.
• In 1990 Solar Wall invented the solar air heating device.
• Today through the advancement of technology electronic devices allow people to control and regulate the temperature through the use of electronic devices.

In modern times, wood is occasionally used as a source of heat for the following:

1. It contributes to rapid deforestation
2. Air pollution occurs due to the burning of wood.
3. It destroys forests and houses due to fires.

But of course, just as much as a modern furnace is convenient, there are also some downsides to it. And we thought by educating you about the cons, you can better prepare for it. Here are common problems encountered in the maintenance of a modern furnace:

What You Need To Watch Out For When You Own A Modern Furnace

1. Lack of maintenance may lead to poor comfort levels, premature repairs or replacement of the unit and course higher energy cost.
2. Problems with the light bulb or ignition control may lead to malfunction causing intermittent or no heat in your house.
3. Dirty or clogged filters will restrict the airflow.
4. Lack of circulation and airflow will strain the system which will eventually cause system failure and aging of the system’s fan, monitors, ball bearings, and others
5. If the system is not commensurate to the prescribed space, you will experience a longer period for cooling or heating. Since it will take longer to attain the normal levels, the energy cost will go up and eventually overrun the heat pumps. For example, a room requires a 1 horsepower air condition unit and only one half powered was installed. This will be a major disaster since you probably will have to replace the unit.
6. Faulty thermostats in the either traditional or high modern system will lead to lower battery life, and the incapacity to match with the HVAC in your house.
7. Leaking ductwork is virtually invisible so you may need a specialist for this job. If it is not leaking it will provide for better and even heating, better indoor air quality, and protection against backdraft. (A backdraft is a serious matter because it can result in an explosion. It happens when an oxygen-deprived area is suddenly opened.)
8. A moldy furnace will result in a moisture build-up that can be a perfect breeding ground for molds.

And with all that being said here’s a list of recommendations, guides, and tips in hiring a very good company for furnace repair in Thornton should the need for one arise in the future. After all, you’ll never know when that furnace of yours will give out and there’s maintenance to think about too. 

• Never hire a door to door contractor. They are not reliable. Only consider a local and well-established company
• Make sure that they are a license contractor. The City of Thornton classifies the contractor into Class A – General, Class B –Building, Class C – Residential. Choose into what class or category you may belong to and ask for the necessary license.
• Ask for several written bides as proof that they are qualified for the job.
• Ask for training certificates of its technician. The Highest standard and considered as the golden certificate among the technician is the NATE or North American Technician Excellency. Others include the EPA 608 which is issued by the Environment Protection Agency. These certificates are available in almost all the states in the US. You can also ask for the equivalent of the certificates in Thornton, Colorado.
• Check with the Better Business Bureau for any complaints,
• Be sure that the Contractor carries insurances like liability insurance, workers’ compensation in case of injuries. This will protect you from any liabilities in case of accidents on the job sites
• Other useful tips include online reviews. The proximity of the company to the need, quality of workmanship and ask for referrals.

Similar Posts:

• A Clean Filter for HVAC Systems
• What Is A Norfolk HVAC Firm & Why Do You Need It
• Reasons to Call an Air Conditioning Repair Company
• Infographic: Pump Up the Savings with Heat Pumps
• 3 Ways To Keep Electric Bill Down In The Summer