A Clean Filter for HVAC Systems

A clean and well made air filter is the lifeblood of any modern heating, ventilation and air conditioning system (HVAC). This is because both heating and air conditioning systems rely on proper air flow to operate efficiently. A dirty or clogged filter will cause less air flow. This leads to an inefficiently running system and higher fuel costs.

In addition to energy costs, restricted air flow causes the system to work harder. Moving parts are subjected to excessive wear and will need to be replaced on a more frequent basis. Premature failure of the HVAC system is an expensive repair. It may also leave the homeowner without either heat or air conditioning at the wrong time.

Most importantly, a main purpose of the filter is to remove airborne irritants from air within the house. Pet dander, dust, dirt, fireplace and cigarette smoke and other pollutants need to be filtered from the air. Because modern homes are insulated and sealed so well, air purification is more important. The EPA has determined that indoor air can often be more polluted than outside air, sometimes by several multiples.

It is recommended that filters be changed every three months, and should be checked whenever there is remodeling occurring inside. Changing a filter only takes a few minutes, but it is also one of those tasks many homeowners forget. That is why a company such as Your Filter Connection provides an auto ordering option for its customers. When signing up for this option, the company ships new filters on a periodic basis, billing the customer’s credit or debit card. The customer need not worry about forgetting or calendaring the task again.

Modern filters are a large improvement over past years. Where older furnace filters were often thin, paper filters, modern filters are designed with more depth to collect more airborne particles. High quality filters are able to collect up to 98 percent of airborne debris. The highest quality models utilize activated charcoal within the filter to help eliminate both air particles and odors.

Other types of filters use electrostatic energy as a pre-filter to collect materials. These can come in both charcoal activated and non charcoal media. A Honeywell Furnace Filter can be a pre-filter, a grille type filter or other types. Before ordering, a homeowner should measure the correct size to properly fit their HVAC system. If unsure, they can check the owner’s manual or contact their furnace manufacturer to ensure the filter they choose is compatible with the system.

Similar Posts:

• Keep your water clean with water filters
• Acer unveils acerpure air purifiers in PH
• 3 Ways To Keep Electric Bill Down In The Summer
• Reasons to Call an Air Conditioning Repair Company
• How To Get The Best Furnace Repair In Thornton Colorado